Name: China Low Price Psa Oxygen Generation Plants Manufacturers Factory - Customized Service - Nuzhuo Technology
Brand: NUZHUO
SKU: 176436085

Psa Oxygen Generation Plants

The Psa Oxygen Generation Plants：
1.Oxygen generated in our PSA oxygen generator meets the requirements of industrial as well as medical applications. Numerous companies from around the globe are using our PSA oxygen plant and are generating oxygen on-site for running their operations.
2.Oxygen can be produced and used entirely on site without the need for transportation or filling. Of course, if you have any transportation or filling needs, we can also meet them.
3.PSA technology through physical methods to reduces potential safety hazards

Send Inquiry

Chat Now

Description of Psa Oxygen Generation Plants

Psa Oxygen Generation Plants

Psa Oxygen Generation Plant is physical principles, air as raw material, low cost, economical and environmentally friendly.This device adopts intelligent soft cycle switching, and you can adjust your purity and flow rate within a certain range.When nitrogen is adsorbed, oxygen is enriched. At the same time, under the principle of pressure swing adsorption, oxygen and nitrogen are separated, and ultimately high-quality oxygen is obtained.And we usually use skid-mounted units.

The specifications of Psa Oxygen Generation Plants

As you can see, in this set of equipment, we need to configure air compressors, refrigerated dryers, precision filters, air buffer tanks, adsorption towers and other devices. The air buffer tank is a must-have because it not only collects dry air but also prepares air raw materials for the AB towers. If your altitude is relatively high, you need to be equipped with a booster, a filling row and the corresponding gas cylinders.

INSTALLATION SOLUTION

Step 1: Connecting A&B from the flange of the air compressor to the flange of the refrigerated dryer,using this black DN50 high pressure tube for connection.

Step 2: Connecting C&D from the oxygen generator to the oxygen booster, using this black DN50 high pressure tube for connection.

Step 3: Connecting F from the oxygen booster to the filling manifold,using this black DN50 high pressure tube for connection.

Step 4: The filling manifold connect to oxygen cylinders.

The following points should be noted during installation:

1. The connection between each equipment needs to be sealed!

2.Gaskets and screws need to be tightened!

3.Do not have air leakage phenomenon!

The uses of oxygen

The advantages of our company

After-sales service

The after-sales service we promise you is not just empty talk. On the contrary, we have a complete set of legally binding after-sales regulations that will take effect from the moment you purchase the produc

Quality assurance

All of our products have passed a series of quality certifications such as CE and ISO. The quality issues you are concerned about are exactly what we value most